Offshore Rental Equipment
Offshore Rental Equipment > Diesel 10 x 10 Godwin Dri-Prime Pump

<< Return

Diesel 10 x 10 Godwin Dri-Prime Pump

Godwin CD250M Dri-Prime Pump

An extremely rugged pump, the 10" (250mm) CD250M Dri-Prime pump is capable of flow rates to 3600 gpm (227 l/sec.), total dynamic heads to 180' (54.9 meters), and solids handling capabilities up to 3-1/8" (79mm) in diameter. The CD250M also features the unique Godwin high pressure oil bath mechanical seal that allows for indefinite dry running, perfect for intermittent flow applications. All of these features come standard on a highly maneuverable highway trailer or compact skid for convenient use.
Package DOES NOT include suction hoses, discharge hoses, fittings, or flanges

The dimensions are 5'10” wide x 9'9” long x 7'1” tall.

> MGW 15,000 lbs.

> Pre-slung with a 5/8” x 7' 4 leg sling with Ύ” SAS.

> 82 gallon fuel tank. 78 usable gallons

Total Delivery Head - Feet

Total Suction





Head - Feet

Output - GPM

















Performance Table

Diesel Set — John Deere 6068T, 147 hp (109.6 kw) @ 2200 rpm

Impeller Diameter — 11-3/8 inches (290 mm)

Performance data listed in table and curves based on water tests at sea level and 68° F (20° C).
Larger diameter pipes may be required for maximum flows.

Maximum Operating Speed:
2200 rpm

Maximum Operating Temperature:
+212° F (100° C)

Maximum Working Pressure:
78.0 psi (5.4 BAR)

Solids Handling:
3-1/8" (79mm) diameter

Maximum Suction Pressure:
100 psi (6.9 BAR)

Maximum Casing Pressure:
117 psi (8.1 BAR)

Fuel Tank Capacity:
150 gallons (568 liters)

Pipe Connections:
10" (250mm) ASA 150#


  • Close mounted arrangement carrying pump and vacuum priming compressor mounted to a diesel engine or electric motor.
  • Cast iron construction solids handling pumpend. Stainless steel and other hardened materials also available.
  • Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 3-1/8" (79mm) in diameter.
  • Continuously operated "Godwin” air ejector priming device requiring no form of periodic adjustment or control.
  • Dry running, high pressure oil bath, mechanical seal with high abrasion resistant silicon carbide interfaces.
  • Solids handling swing check Non Return Valve.
  • Compact unit mounted on a skid base or two-wheeled highway trailer both incorporating integral overnight running fuel tank.
  • Simple maintenance, normally limited to checking engine and seal cavity oil levels.
  • Standard John Deere 6068T or Caterpillar 3056TA engine. Also available with a variety of other diesel engines or electric drive motor.
  • A variety of silenced units are available.
  • Balanced unit with centralized lifting bracket for easy handling


© Copyright 2018, Morgan City Rentals. All rights reserved.